Sungrow SG1K5TL-31, Руководство пользователя

Страница: 29 / 79

Installing Inverter onto Wall
4
23
4.4
Storage of Inverter
If you want to perform decommissioning the inverter, you should choose an
appropriate location to store the inverter.
z The unit must be stored in original package and desiccant must be left in the
package.
z The unit must be stored in a clean and dry place to protect against dust and
moisture.
z
The storage temperature should be always between -25
℃
and +60
℃
. And the
storage relative humidity should be always between 0 and 95%.
z
During the storage time, periodically check whether any visible damage by rats.
Replace the package if necessary.
z After long term storage, local installer or service dept. of Sungrow should perform
a comprehensive test before connecting the inverter into PV power system.
4.5
Selecting Installation Location
Installation shall comply with local regulations and technical rules. Installation shall
comply with the relevant instructions of AS 4777.1.
Selecting an optimal installation location for the inverter is decisive for its operating
safety as well as it expected efficiency and service life.
1. Take the load capacity of the wall into account. The wall (such as concrete wall and
metal structure) should be strong enough to hold the weight of the inverter over a long
period of time.
2. Install the unit where is accessible to install, electrical connection or service.
3. Do not install the inverter where contains flammable
materials or flammable gas in the vicinity of the unit
installation.