SunFounder TS-10 Скачать руководство пользователя страница 107

Страница: 107 / 213

SunFounder TS-10 10.1-inch Touch Screen

git clone https:

github

com

sunfounder

10.1

touch

screen

Projects

5.7.1 Animate A Name

Description

Today we will learn to write our name on Scratch. When we click on the letters in the name, they will become active.

Click the green flag to start.

Or click

Animate A Name

, and then learn online tutorial on the Scratch official website.

Required Components

• A Screen

• Scratch 3 (either online or offline)

You Will Learn

• Choose the sprite you want.

• Program different sprites separately.

• Make the sprite change color.

• Let the sprite spin.

• Let the sprite zoom.

• Let the sprite flash.

Lesson Guide

My Name is Abby.

In the lower right corner of Scratch, there are two areas. We can add the sprite and backdrop we want here.

5.7. Scratch Projects

103

Содержание TS-10






















































































































































































































Результаты поиска

Содержание TS-10

Отзывы:

SunFounder TS-10, Руководство пользователя, Страница: 107 / 213

Результаты поиска

Содержание TS-10

Отзывы: