Congratulations on your Sunforce Purchase. Every effort has been made to ensure this product is designed to the
highest technical specifications and standards. It should supply years of maintenance free use. Please read these
instructions thoroughly prior to installation, then store in a safe place for future reference. If at any time you are
unclear about this product, or require further assistance please do not hesitate to contact our trained professionals
operating the customer support line 1-888-478-6435 or email to
85 Watt Solar Power Panel
Specifications and Included Items
Power Rating: Up to 85 Watts/4.9 Amps
Includes 20ft Wire, Solar Panel, Mounting Screws and Brackets, Voltage Tester.
Warning:
• Avoid Electrical Hazards when installing, wiring, operating, and maintaining your Solar Module. The solar module
included generates DC electricity when exposed to sunlight or other light sources.
• For use in 12-Volt systems only
• Observe proper polarity throughout entire power cable wiring route.
• Work Safely. Do not wear jewelry when working with electrical or mechanical equipment. Use protective eyewear
when working with batteries or drills. Use extreme caution when on ladders or on roof.
• Follow all Safety Precautions of the Battery Manufacturer. Some batteries can release flammable hydrogen gas.
Do not produce sparks when working in locations where flammable gases or vapors exist. Shield skin and eyes
from battery acid. Wash thoroughly with water if skin or clothing come into contact with acid or any corrosive matter,
which may have accumulated, on the battery. Keep the terminals and casing clean.
• Use a Charge Controller for wattages above 15 Watt’s
• Do not attempt to charge non-rechargeable batteries
• Always connect charge controller to battery first
• When disconnecting, always disconnect battery last
Features
•
Shade tolerance
•
Powerful crystalline technology
•
Overcharge and Discharge protected
•
Rugged Aluminum Frame
•
Covered by a Twenty five year warranty.
•
Weatherproof
•
Pre-drilled installation holes
•
Included Professional Grade Mounting Hardware
MOUNTING THE SOLAR PANEL:
1.
Choose an appropriate location that provides the most direct sunlight and can support the solar panel, and is free
from shade. Be aware of surrounding objects; although an object seems far from the mounting location it may still
obscure the sun from the panel. The ideal year round position for a solar panel in the Northern Hemisphere is facing
due south tilted at an angle equal to your latitude. For most North American locations any angle between 30 and 50
degrees is suitable. Note: Mounting a solar panel vertically will optimize low winter sun position but is not beneficial
in the summer months.
2.
Using the mounting brackets and screws included, first attach the bracket to the solar panel. Place the rubber
ring between the panel and the bracket. The rubber ring allows for air flow between the panel and the mounting
surface, maximizing the efficiency of the panel. Note: If mounting to a roof of a vehicle, it may be necessary to drill
holes in the roof. These holes should be resealed once the panel is installed; clear silicon caulking is commonly
used. If mounting to a surface where it is impractical to drill holes it may be necessary to construct a frame.
