8
FIGURE 36
(3) Place the gasket in position before wiring
(4) Connect the
brown
wire from the fixture to the
brown
(Live) power supply wire from your power
source using the wire nuts provided. Connect the
blue
wire from the fixture to the
blue
(Neutral)
power supply wire using the wire nuts provided.
Connect the
yellow/green
wire from the fixture to
the
yellow/green
(Earth) power supply wire using
the wire nuts provided (FIGURE 37).
Earth Neutral Live
Brown
Blue
Yellow/Green
FIGURE 37
(5) Place the wiring box and secure it with the two
screws provided. (FIGURE 38)
FIGURE 38
Note:
THIS EQUIPMENT MUST NOT BE MOUNTED
ON AN OUTLET BOX WHICH IS SUPPORTED BY A
BAR HANGER (or equivalent)
TROUBLESHOOTING
Light does not turn on:
Confirm that you have made a correct “wiring
connection”
Make sure that the bulb has not burned out
and is installed correctly
Warning Sound is on after powering up:
SD card is not inserted
PIR and LUX settings are not working:
Do not allow sunlight to fall directly on to the
front of the unit
Warning sound and video recording is not on:
They are on only when the unit is triggered
Make sure the unit is not on Scene 4
Please re-power the unit
Filmed videos can’t be saved onto the SD card:
Damage of the videos might be caused by
inappropriate retrieval/insertion of SD card;
ensure the unit is powered off before action is
taken
Video and sound recording is not functioning:
The function is disabled if the unit is set to
scene 4
Views of people are blurred during the night:
Avoid the sky as a background; turn the
camera lens down if needed
Try not to spot the light on reflective objects;
the reflection of light could cause blurriness
SPECIFICATIONS
Power Requirement
120V~ 60Hz for USA or
220-240V~ 50Hz for EU or
1.5V AA alkaline battery x 4
(for SD card & camera only)
Lighting Load
Max. 60W x 2 G9 Halogen
Bulb (VC613-1)
Max. 60W x 1 G9 Halogen
Bulb (VC613-4)
PIR Detection Angle
Up to 150
°
PIR Detection Distance Up to 12m under 28
°
C
Protection Class
I
Protection Degree
IP44 for Europe. Suitable for
wet locations for USA
Swiveling Angle
Sensor Part: Horizontal 90
°
(45
°
left, right), Vertical 30
°
(downward)
Mounting Height
2 to 2.5m
Time Adjustment
20 secs/1 min /5 mins
Lux Adjustment
Yes
Warm Up Time
About 60 second
Operating Temperature
Range
-10
°
C ~ 40
°
C. 20~85%
relative humidity,
non-condensation.
CAMERA
Pixel
640 x 480 Pixel VGA
Lux Sensitivity
1 Lux
White Balance
Auto
AGC
Auto
Backlight
Compensation
Auto
SNR
>48 dB
Gamma Compensation 0.45
Electric Shutter
Auto
Angle
60
°
Microphone
Built-in
SD Card
