Operation manual of solar water controller SR868C8/SR868C8Q
---------------------------------------------------------------------------------------------------------------------------------------------------
- 32 -
Setup steps:
To access main menu FUN, then select submenu BYPR, “BYPR - - -” displays on
screen.
►Press “SET” button, “- - -”blinks on screen,
default set is “OFF”
►Repress “SET” button, to activate by-pass
function, “BYPR 80
℃
” displays on the screen, “80
℃
” blinks
►Press “+”“-” button to adjust this parameter, adjustable range (5
℃~
120
℃
)
► Press “ESC” button to exit the menu or wait for 20 seconds to exit automatically,
parameters are saved automatically.
This signal displays on the screen, it indicates by-pass function is
activated.
Application example
Picture1 Picture2
4.7 HND Manual mode
When using this controller first time or when debugging this controller, output of this
controller
(
P1
,
P2
,
R1
,
H1
)
can be triggered manually. “On, OFF” control.
Setup steps:
To access main menu HND,
►Press “SET” button, “HND1 off” displays on the screen, P1 output manually set
►Repress “SET” button, “HND1 on”
displays on the screen,
P1
output is
switched-on
►Repress “SET” again, “HND1 off”
Содержание SR868C8
Страница 1: ......
Страница 44: ...Operation manual of solar water controller SR868C8 SR868C8Q 43 SR802 CONNECTION DIAGRAM ...