SUNFLOWER SFD-SS Series, Руководство по установке

Страница: 8 / 17

http://www.sunflower ‐ solar.com/
Version 11.03
8
Subjec
t to c
hange 2011 SUNF
LOWER SOLAR
3.3.3 Assemble Vacuum Tubes
Carefully unpack the vacuum tube; remember this is glass, unlike the rest of assembly this will
break unless handled carefully. Fit a black rubber dust seal to the tubes from the open end with
the rounded side facing down. Slide this 200mm down the tube.
Apply a smear of grease to the top 100mm of the open end of the first vacuum glass tube. Using
a gentle pressure and twisting motion insert the greased tube into the locating hole until it is
well inside the cylinder and the bottom end of the tube is at least 25mm clear of the tube
carriage guides. Now using a gentle downward pressure and twisting motion lower the tube
until it fits snugly into the carriage guide.
Slide the black rubber dust seal up the tube until it’s outside edge fits flush with the cylinder.
Repeat for the rest of the tubes.
Details:
1. Please install the stand frame and the water tank firstly;
2. Add a little of scour (such as washing-up liquid, etc.) into the water. Then the water can be used as
lubricant;
3. Put the Ornament ring on the opening part of the SFVA tube. Daub some lubricant referred in the above
item on the opening part of the SFVA tube;
Fig 3.6
4. Insert SFVA into one of the water tank's holes for evacuated tubes. Please make sure the opening part of
the SFVA tube is inserted into the Seal Silicon ring and it's easily to insert if in the way of twisting motion
slowly;