SUNFLOWER SFD-SS Series, Руководство по установке

Страница: 7 / 17

http://www.sunflower ‐ solar.com/
Version 11.03
7
Subjec
t to c
hange 2011 SUNF
LOWER SOLAR
3.3.2 Assemble water cylinder (Water tank)
You are now ready to place the frame in position. If attaching directly to the ground now lower the hot
water cylinder on to the cradle at the top of the frame, ensure the bolts from the cylinder are through
the slots on the cradle and fit the nuts finger tight. Using a string or straight edge to check the
alignment of the tube carriage guides and tube locating holes in the cylinders. Gently turn the cylinder
to achieve alignment. If the holes are not aligned the unit may leak or tubes may break when being
fitted. Once the cylinder is aligned tighten the bolts to lock it in place and recheck alignment.
Note: Before assembly, please check the water cylinder and there is other thing or not inside it, if yes,
please take it out and clean it with water.
Fig 3.5
Fig 3.5 Spec. : After confirmation of finishing installating the frames, put the water tank on the frame and
tighten the screw cap.