User's Manual
47
CHAPTER 5
Zone 2 Operation
Note
: Zone 2 must fi rst be enabled
using the OSD (see page 36), or it
will not work. Zone 2 can be turned
on even if the Main Zone is off.
If you have an amplifi er and a pair
of speakers in a second room or
area (Zone 2), they can play a stereo
source independent of what is play-
ing in the Home Theater room (Main
Zone). You can also play the same
source as selected in the Main Zone.
Zone 2 plays stereo sources, and is
unaffected by the Tone controls, DSP,
Holographic Image, surround modes
or bass management.
Connections
The connections for Zone 2 are
shown on page 24.
Note: Zone 2 can play analog
sources independent of what is play-
ing in the Main Zone. It
cannot
play
from a digital-only source unless that
input is selected and playing in the
Main Zone. To play a source such as
a DVD player in Zone 2 independent
of the Main Zone, make sure you
connect the player's L-R analog audio
output to the TGIV.
Indicators
The front panel has two LEDs to
show the Zone 2 status:
Zone 2 Power
This LED is
always on
when Zone 2
is on. If it is
off, there will
be no output
to the Zone 2
amplifi er.
Zone 2 Adjust
This turns on whenever the Zone
2 source or volume is being
changed. Note: if this is on, then
any adjustments you make of vol-
ume or input, will affect Zone 2, not
the Main Zone.
DOLBY
DIGITAL
DIGITAL
SOURCE
PRO LOGIC IIx
DTS
SIGNAL PROCESSING
SIDE-AXIS
HOLOGRAPHIC
IMAGE
ZONE TWO
ADJUST
ZONE TWO
POWER
POWER
In addition to these LEDs, the front
panel display will show the input and
volume adjustment.
Turning on Zone 2
Use the On Screen Display in the
Main Zone to check that Zone 2 is en-
abled. (See page 36, middle column
for details). This enables the Zone 2
system, but it still has to be turned on.
Press the remote's ZONE 2 button.
The remote's POWER, VOLUME and
MUTE buttons then work for Zone 2.
The remote display changes as fol-
lows:
PAGE 1
This allows you
to select the
inputs to play in
Zone 2. Z2MAI
(main) allows
Zone 2 to play
whatever is play-
ing in the Main
Zone.
Press PAGE to show the next page:
PAGE 2
This has discrete
codes which are
useful if you want
to program the
remote control
with Macros.
Z2 OFF, Z2 ON
Zone 2 on or off.
Z1 Off, Z1 ON
Main Zone on or off.
Z2 BL
Use these two buttons to adjust the
left-right balance of Zone 2.
B, C, E, F
These are extra buttons you can
Learn over and re-Label with your
favorite Zone 2 commands.
Press MAIN to return to PAGE 1,
and press it again to return to the
Main Menu.
GUIDE
MENU
MODE
MODE
EXIT
INFO
SYSTEM
+10
POWER
3
1
6
4
9
7
ENT
DIS
M3
M1
2
5
8
0
M2
PAGE
FAV
MAIN
OFF
VOL
CH
MUTE
PREV
CH
CD
AUDIO
MAIN
TAPE
AUX
ZONE2
TGIV
DVD
VCR
SAT
TV
CABLE
PAGE
VOLUME
MUTE
TUNER
PRESETS
TUNER
CONTROLS
POWER
Note: Zone 2 can also be turned
on and adjusted without using the re-
mote. Press the Zone 2 button on the
TGIV front panel, followed by Power,
to turn it on (or off), or adjust the input
source or volume.
Zone 2 operations will work even if
the Main Zone is off.
