User's Manual
10
LEVEL
1
2
3
4
5
6
7
8
9
0
+10
UP
DIRECT
AM/FM
DOLBY
DIGITAL
DIGITAL
SOURCE
PRO LOGIC IIx
DTS
SIGNAL PROCESSING
SIDE-AXIS
HOLOGRAPHIC
IMAGE
ZONE TWO
ADJUST
ZONE TWO
POWER
POWER
MANUAL
TUNING
DOWN
MODE
SELECT
UP
DOWN
UP
ROTATION
ZONE
TWO
DOWN
BASS
TREBLE
HOLOGRAPHIC
IMAGE
PANEL
DIM
MUTE
MANUAL INPUT SELECTOR
FULL AUTOMATIC
OPERATION
TUNER CONTROLS
TONE CONTROLS
Theater Grand
Sonic Holography Nine point One Channels Surround Sound Processor
Sunfire
Theater Grand IV
CHAPTER 1
Front Panel Features
1. Signal Processing
DOLBY DIGITAL
This light is on when a Dolby
Digital signal is being decoded.
DTS
This light is on when a DTS
signal is being decoded.
DOLBY PRO LOGIC IIx
This light is on when the Dolby
Pro Logic IIx mode, or Dolby
Pro Logic II mode is engaged.
DIGITAL SOURCE
This light is on when a Digital
signal is being decoded.
ZONE TWO POWER
This light is on when Zone 2 is
turned on.
ZONE TWO ADJUST
This light is on when Zone 2 is
being adjusted.
HOLOGRAPHIC IMAGE
This light is on when the HOLO-
GRAPHIC IMAGE "circuit" is
engaged. (This is actually
modeled in DSP).
SIDE AXIS
This light is on when the side-
axis outputs are enabled.
2. IR Receiver Window
This window should be clean
and free from ob struc tion for the
remote control to work correctly.
3. Display
This soothing blue display shows
which input is se lect ed, the tuner
frequency, volume level, and other
useful features.
4. Mode Buttons
MODE UP/DOWN
These buttons allow you to step
up or down through the various
sound playback modes.
ZONE TWO
Note: If Zone 2 has not been
enabled (see page 36) this but-
ton has no effect.
Any changes you make after
pressing this, will affect Zone 2
and not the Main Zone. For ex-
ample, press this and POWER
to turn on Zone 2, then adjust
the Volume and select an input.
Press ZONE 2 again to revert
back to Main Zone operation.
It will also revert back after a
short period of no activity.
TREBLE/BASS SELECT
Use these buttons to select
either the Treble or Bass for ad-
justment using the UP/DOWN
TONE controls (11).
HOLOGRAPHIC IMAGE
Engage this "circuit" to add a
three di men sion al effect, es pe -
cial ly to stereo listening.
PANEL DIM
The front panel lights have four
levels: bright, me di um, low and
off (low intensity display with
amber LEDs off).
MUTE
This turns off the sound. Press
it again, or adjust the volume
control to return to the pre vi ous
volume level.
5. Rotation
This light pulses when the front
panel volume LEVEL or INPUT
SELECTOR are being rotated, or
when you are using the remote
control.
1
2
3
4
6
5
7
8
9
10
12
13
11