background image

6602LP 

Rev. 1/15/20

SUNExpress™ Warranty

This jack is under the SUNEXpress™ Warranty. The SUNEXpress™ Warranty allows Sunex

®

 users to exchange inoperable, defective  

service jacks still under 1 year warranty directly with Sunex Tools

®

. Please call (855) 600 – SWAP or visit www.sunextools.com/sunexpress  

for more details.

TROUBLESHOOTING

Important: Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In accordance with 

ASME PASE-2019 Load Sustaining Test: “A load not less than the rated capacity…shall not lower more than 1/8" (3.18mm) in the first minute,  
nor a total of .1875" (4.76mm) in 10 minutes.” Lowering within this range is considered normal operation and is NOT a warrantable defect.

OWNER/USER RESPONSIBILITY

The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this jack.  

Personnel involved in the use and operation of equipment shall be careful, competent, trained, and qualified in the safe operation of the  
equipment and its proper use when servicing motor vehicles and their components. Warning information should be emphasized and  
understood. If the operator is not fluent in English, the manufacturer’s instructions and warning shall be read to and discussed with the  
operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or 
user must study and maintain for future reference the manufacturers’ instructions. Owner and/or user is responsible for keeping all warning 
labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer.

OWNER'S MANUAL

SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S SUNEX TOOLS® BRANDED PRODUCTS 
ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. 

Sunex International, Inc. will repair or replace its Sunex Tools® branded products which fail to give satisfactory service due to defective 
workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific 
product. This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our option any part  
or unit which proves to be defective in material or workmanship.

Other important warranty information

This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs 
or replacement made by anyone other than Sunex Tools® or its authorized warranty service centers. The foregoing obligation is Sunex Tools’ 
sole liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages.

NOTE:

 Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 

not apply to you. Return equipment or parts to an authorized service center, transportation prepaid. Be certain to include your name and 
address, evidence of the purchase date, and description of the suspected defect. If you have any questions about warranty service, please 
write to Sunex Tools®. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 
Repair kits and replacement parts are available for many of Sunex Tools products regardless of whether or not the product is still covered by 
a warranty plan.

SHIPPING ADDRESS:

 Sunex Tools  •  315 Hawkins Rd.  •  Travelers Rest, SC 29690

MAILING ADDRESS: 

Sunex Tools  •  P.O. Box 1233  •  Travelers Rest, SC 29690

LIMITED WARRANTY

PROBLEM

ACTION

1. Unit will not lift rated load.

Purge air from hydraulic system by following procedure under 
SETUP.

2. Unit will not sustain rated load or feels “spongy” under rated load. Purge air from hydraulic system as above.
3. Unit will not lift to full height.

Purge air from hydraulic system as above.

4. Handle tends to raise up while the unit is under rated load.

Pump the handle rapidly several times to push oil past ball valves in 
power unit.

5. Unit still does not operate.

Contact Sunex authorized hydraulic service center.

MODEL 6602LP

CAPACITY: 2 TON  

LOW RIDER SERVICE JACK

Содержание 6602LP




















Отзывы: