Sundirect GD-Plus, Инструкция по установке и эксплуатации

Страница: 10 / 24

10
5.6 Electric power connection
Installation and electric connection should only be carried out by qualified personnel such as an
electrician. National electric safety standards must be considered when wiring to this panel. This is
a IEC protection Class 1 appliance and it must be earthed.
Make sure the mains power is switched off before you start the installation when hardwiring. Any
fixed wiring outside the heater coming into contact with the heater must have a protection
sleeving that is heat resistant of at least 90°C. Make sure that cables are not coiling and that there is
no excess cable behind the heater. The length of the cable should be measured exactly to the
length needed. Do not connect a heater that is damaged in any way to the power network. Before
installation, make sure that the heater, cable and plug are completely free from damages. When in
doubt contact your local Sundirect dealer for assistance.
6. Technical specifications:
Panels covered by these instructions are listed in the table below.
Model Power Size Weight Mounting Built-in
thermostat
receiver IP Protection
PE350-Plus 350W 60*60cm 4.1Kg Wall/Ceiling Yes IPX2
PE380-Plus 380W 30*120cm 4.3Kg Wall/Ceiling Yes IPX2
PE540-Plus 540W 60*90cm 6.0Kg Wall/Ceiling Yes IPX2
PE700-Plus 700W 60*120cm 7.8Kg Wall/Ceiling Yes IPX2
PE1000-Plus 1000W 85*120cm 11.4Kg Wall/Ceiling Yes IPX2
IC400-Plus 400W 60*60cm 8.0Kg Wall/Ceiling Yes IPX2
IC700-Plus 700W 62*98cm 13.8Kg Wall/Ceiling Yes IPX2
IC900-Plus 900W 68*123cm 18.0Kg Wall/Ceiling Yes IPX2
IC1100-Plus 1100W 63*153cm 20.0Kg Wall/Ceiling Yes IPX2
GD400-Plus 400W 66*66cm 12.4Kg Wall only Yes IP44
GD600-Plus 600W 60*100cm 16.4Kg Wall only Yes IP44
GD800-Plus 800W 70*130cm 24.1Kg Wall only Yes IP44
MD300-Plus 300W 66*66cm 12.4Kg Wall only Yes IP44
MD450-Plus 450W 60*100cm 16.4Kg Wall only Yes IP44
MD650-Plus 650W 70*130cm 24.1Kg Wall only Yes IP44