Interfacing with Digital Room Controllers
1) Connect the timer to the tanning bed as described.
2) Set the address on each timer as described in “Setting the Address
Section”.
3) Connect timers to the bed network. Connect the Digital Tanning System
Controller to the closest timer. Refer to the Digital Tanning System Controller
User’s Guide for operational instructions.
Note:
The Digital Tanning System Controller or the software you are using
if you are using a PC controls Delay.
Clean Room
Once the session time has elapsed, the display will show two solid periods
only. This is an indication that the room needs to be cleaned. To clear the
clean room indication, press and hold the
UP
button on the timer in the
tanning room until the two periods disappear and a “0” appears. To disable
the clean room feature, set parameter 9 to a 0.
Содержание 20 GENESIS System 332 Pro-1
Страница 1: ......
Страница 7: ...CONTENTS LEG POWER BOX MIDDLE FACADE FRONT FACADE BASE CANOPY POWER BOX COVER ...
Страница 17: ...CANOPY SERVICE PARTS EXPLOSION ...
Страница 20: ...LEG MIDDLE FAÇADE SERVICE PARTS EXPLOSION ...