Sundance Spas 780 Metro, Руководство пользователя

Страница: 25 / 66

Page 19
CAUTION: Never fill with water from a water softener. If your
water is extremely “hard”, it is preferable to fill half-way with
hard water and the rest of the way with softened water. Or,
you may fill entirely with hard water if you use a special water
additive available from your Sundance dealer.
13. Consult your authorized Sundance dealer for chemical recommenda -
tions, then add chemicals to spa water to achieve a constant sani-
tizer reading within the levels recommended by the Association of
Pool And Spa Professionals/USA printed on the inside cover of this
manual.
14. Turn on all jet pumps when adding chemicals to ensure proper mix-
ing and leave your spa cover open until the sanitizer level falls below
4.0 ppm to protect pillows and plastic knobs from chemical attack.
CAUTION: Never leave your spa unattended for any reason
while the cover is open and accessible to small children and
animals!
CAUTION: To prevent the unlikely possibility of contracting a
waterborne illness, maintain water chemistry within step 6
parameters. If you or other bathers experience such a
condition, discontinue use and seek medical attention
.
15. Establish a sanitizer reading between 3.0-4.0 ppm Chlorine or 2.0-
4.0 ppm Bromine, then allow the spa to set undisturbed for 8 hours.
Retest water after 8 hours to determine if sanitizer levels are stable.
If sanitizer levels are stable, your spa is ready for use. To ensure
healthy water conditions, always maintain a constant sanitizer read
-
ing within the levels recommended by the Association of Pool And
Spa Professionals/USA printed on the inside cover of this manual.
If sanitizer levels are not stable at this time, it will be necessary to
repeat this procedure in its entirety (steps 1-15) until stable sanitizer
readings are achieved.