Suncast HomePlace Vintage Garden Building, Инструкция по сборке, Страница: 7 / 48

17.
19.
18.
The shorter studs (jack studs that fit un-
der the ends of the door header) must be
installed in the bottom plate notches. The
space between the jack studs will be 70-
1/2”. The 78-1/2” studs are fastened to the
jack studs, providing 3” thick framing on
both sides of the door opening. Door head-
er consists of 3 pieces of pre-assembled
lumber.
Front wall framing layout for doors-on-left/
window-on-right is pictured here.
Taller door framing stud (king stud) will mea-
sure 78-1/2” due to not going into a notch.
Other studs that go into the notches will
measure 79”.
Vintage Garden Building Assembly Manual
© Suncast Corporation
Page 7
20.
Select studs with notches for window fram-
ing, and place them at appropriate locations
on the building when framing. Nail the hori-
zontal window framing pieces to the studs,
placing the horizontal pieces in the provided
notches.