Suncast HomePlace Vintage Garden Building, Инструкция по сборке, Страница: 15 / 48

49.
52.
51.
50.
Construct remaining side wall; set and fas-
ten in place as in Steps 45-48.
The installation is to be done similarly to that
used in Steps 26-30, except that the start-
ing piece does not overhang the edge of the
wall (see Step 51).
Locate siding pieces for one gable wall -
one 2’ wide piece and two 4’ wide pieces.
The 2’ wide piece will be cut lengthwise on
one side and have an underlap on the op-
posite side. Start with the cut edge of the 2’
wide piece, installing it flush with the ouside
of the framing piece on the right-hand side
of the wall. Then, install the two 4’ pieces,
matching the overlaps and underlaps.
Your garden building will now look some-
thing like this, unless a different door/win-
dow layout was chosen.
Vintage Garden Building Assembly Manual
© Suncast Corporation
Page 15