8
Using Your Heater (continued)
Setting the heat level
Pressing the MODE button will cycle through
the following settings:
HI 1500
Watts
MED 900
Watts
LO
600 Watts
HI with fan
2000 Watts
MED with fan
1400 Watts
LO with fan
1100 Watts
Fan only
500 Watts
Standby
The selected heat setting will display, along
with the current room temperature. If one of
the fan modes is chosen, the fan indicator
will also illuminate, as shown below.
•
•
•
•
•
•
•
•
C
MED
FAN
Using the humidi
fi
er
To
fi
ll the humidi
fi
er cup with water:
Open the hinged door on the side of the
heater opposite to the controls.
Remove the humidi
fi
er cup.
Pull the top from the cup to open.
Fill with water no higher than the maximum
level indicated.
Replace the top, return the humidi
fi
er to the
heater, and close the hinged door.
NOTE: Ensure that you do NOT
fi
ll the
humidi
fi
er cup beyond the MAX line indicated
on the cup.
1.
2.
3.
4.
5.
MAX
NOTE: Although this is a 1500W heater,
when used on HI with fan the heater will use
a total of 2000W.
sun_6150TF.indd Sec1:8
sun 6150TF.indd Sec1:8
9/12/2008 8:23:10
9/12/2008 8:23:10
