10
Setting Auto Off
To help conserve energy, you can programme
the heater to automatically switch itself off
after a preset number of hours. You can select
from 30 minutes (0.5 hours) to 24 hours.
Select any heating level.
Press the TIMER button. The clock
and
hour
H
symbols will now appear.
1.
2.
Press the TIMER button to set the number
of hours before you want the heater to switch
itself off (up to a maximum of 24).
Each press of the TIMER button will
increase the time before Auto Off by 30
minute intervals, up to 10 hours, then by
1 hour intervals up to 24 hours.
If you press continuously on the TIMER
button, the time changes more rapidly.
As you increase the time beyond 24
hours, the display cycles back to 0.0.
3.
•
•
•
To check the remaining time
To check for how long before the heater will
switch off, press the TIMER button.
To cancel Auto Off
Press the TIMER button till the hour display
cycles back to 0.0 hours.
This will cancel Auto Off, and the display will
revert to showing the heating mode and room
temperature.
NOTE: you can change the heat setting
and thermostat settings while the Auto Off
function is active.
Using Your Heater (continued)
H
HI
The setting will automatically lock in after
about 5 seconds. The display will now revert
to showing the heating mode and room
temperature. The clock symbol will remain
to indicate that the Auto Off function is
now active.
4.
C
HI
H
HI
sun_6150TF.indd Sec1:10
sun 6150TF.indd Sec1:10
9/12/2008 8:23:12
9/12/2008 8:23:12
