Place the fountain in a desired
location. Use a water resistant mat
to help protect your floor from
splashing or dripping from your pet.
Make sure the pump is mounted to
the lid. (figure D)
Attach the lid to the base and press
down until the lid is secure. Make
sure the electrical cord is held snugly
in the notch in the back of the lid.
(figure E)
Fill the tank with water and twist the
cap onto the tank. DO NOT over tighten.
Place the tank on to the base and press
down to secure on to the base.
Make certain the electrical cord and AC adaptor are dry and then
plug into an outlet. A mild humming sound during normal operation is
to be expected.
Note - To avoid the possibility of the AC Adapter or outlet getting wet,
the outlet should always be above the level of the fountain.
Turn the nozzle to the desired on/off position.
Monitor your fountain periodically for the first day to make sure the
fountain is working properly. Be sure to monitor the fountain on a
regular basis to ensure proper function.
Add water to the fountain base or water tank as needed. The water
level needs to be maintained for the fountain to function properly.
The filters should always be submerged completely in water. Be sure to
check the fountain regularly to help prevent damage to the pump, as
the water may be consumed or evaporate causing the pump to run
dry. Always unplug fountain before filling.
7
8
9
10
11
12
13
14
15
figure D
figure E
Pump
4
