15
Heading
2. Position the blender onto the processor
body above the speed control dial with the
handle to the left where marked "Locate
handle". see Figure 18.
3. To lock the blender into place, simply
hold the handle of the jug and turn it to
the right as far as it will go. The assembly
indicator light will be on if positioned
correctly and locked in place,
see Figure 19.
4. Place ingredients into the jug.
Note:
Do not exceed the maximum indicated
level – 1.5 litres.
5. Position the lid onto the blender jug so
that the long holding lip is facing towards
you, see Figure 20.
6. Turn the holding lip to the right, the
holding lip should be flush with the top
of the jug handle, see Figure 21.
7. Fit the processor bowl and cover as
detailed previously in Figures 2, 3, 4 & 5.
Note:
The blender will not operate if the
processor lid is not correctly locked in place.
8. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
9. Select the required blending speed 1-10 or
PULSE.
Tip:
Further ingredients can be added whilst
blending by pouring through the lid hole once
the measuring cup has been removed.
Fitting/using the tools on your MultiProcessor continued
Fig 20
Fig 21
Fig 18
Fig 19
