-5
-
-6-
USAGE INSTRUCTIONS
HOW TO APPLY YOUR JOINT WRAP
Note:
Some wear of the exterior pad fabric may be seen over time; this is normal and will
not affect the performance of the heating pad. Use caution when fastening straps to prevent
hook fasteners from touching clothing.
HOW TO APPLY TO ELBOW – SEE FIGURE 2
1. Position wrap so Controller Connector (Figure 1, number 7) is hanging down. Insert hand
into Fabric Sleeve (Figure 1, number 2) and pull the wrap up aligning the Sunbeam logo
to the elbow. See Figure 2A.
2. The Elastic Fastening Straps (Figure 1, number 5) stretch for size adjustability and a
comfortable fit. Use available hand to wrap each strap around the arm and secure in
place by attaching the Strap Hook Fastener (Figure 1, number 6) directly to the Exterior
Pad Fabric (Figure 1, number 1) or onto the strap itself. See Figure 2B.
3. To remove wrap, detach and unwrap Elastic Fastening Straps and pull arm out of Fabric Sleeve.
Figure 2
2A
2B
2C
Low
Med
Auto-Off
2 Hours
Hi
Select / Off
1
2
3
4
5
7
8
9
5
6
6
Figure 1
901-825
The FlexTemp™ Hot + Cold Joint Wrap is specifically designed for use on the elbow or
knee joints for hands-free, targeted hot or cold therapy. Suggested treatment duration for
hot or cold application to the joint is 20 minutes, up to three times a day, unless otherwise
directed.
Note:
Always consult with your physician or health professional for recommended treatment
of an injury or chronic muscle or joint pain.
HOT VS. COLD THERAPY
Heat Therapy helps to:
Cold Therapy helps to:
• Relax tight muscles
• Ease stiffness
• Facilitate stretching
• Relieve common muscle and joint pain
• Reduce inflammation
• Ease pain from acute injuries such as
strains, sprains, bumps, and bruises
Figure 1
Model 901-825
1. Exterior Pad Fabric
2. Fabric Sleeve
3. Mesh Gel Pack Pouch
4. Gel Pack Pouch Fastener
5. Elastic Fastening Straps
6. Strap Hook Fastener
7. Controller Connector
8. Controller
9. Gel Pack
JOINT WRAP COMPONENTS
FlexTemp Joint Wrap 901-825_19ESM1 (US).indd 5-6
3/25/19 9:48 AM
