strona: 8 / 14
3.5.
Qualifications of the installation team
●
Observe safety rules.
●
Ability to use of ladders and scaffolds.
●
Ensure transport and storage of the awning.
●
Experience in the use of tools and equipment.
●
Appropriate certificate of approval and use for fixing materials in construction.
●
Installation training at Dragon company (recommended).
●
Training the end user before using the awning.
●
Pass manuals and warranty on the end-user (Handing over protocol/Waranty).
Note
Installation of the awning, adaptation and check the proper functioning can only be
done by trained installers team. This team is responsible for the right installation (with
the anchor bolts) readjustment and test run of the awning.
3.6.
Fastening and pulling on the ropes
If you need to pull the awning in a higher level with the aid of ropes must one:
●
Take out from the packaging.
●
Transport ropes must be fastened so that the awning can not slip out.
●
Uniform load distribution (in horizontal position) during the pulling out.
3.7.
Required tools
●
Ladders/Scaffold,
●
Level,
●
Ropes,
●
Measuring tape,
●
Impact drill and drill bit (depending on the substrate),
●
Imbus (3mm, 5mm, 6mm),
●
Wrench/ringspanner (SW10, SW13, SW17+SW19 and fasteners,
●
Socket wrench, extended (SW13, SW17+SW19),
●
Screwdriver and cross screwdriver,
●
Saw for Aluminum.
3.8.
Installation steps
3.8.1. Check the delivery.
3.8.2. Mark and fix the mounting brackets.
3.8.3. Drill a cable conduit for electric line (only for motor drive).
3.8.4. Measure and fix the frame of the pergola awning.
4.8.5. Check the screws on front profile and all functions of the awning.
4.8.6. perform electrical installation (only for Motor drive).
4.8.7. Set the end position.
4.8.8. couple of hand crank (only for crank drive).
3.8.9. Check the unit.
3.8.10. Training and information the end user before using the awning.
3.8.11. Handing over all the necessary instructions and warranty the end user and pass the awning for use.
3.8.1. Check Delivery
Before beginning the installation should be checked:
●
Check that the information given in the order of: awnings, color and pattern on the fabric, frame color,
type of drive (handle/motor), drive side and the other product features are consistent with the
delivery.
●
Number and accuracy of the delivered parts.
