Sun Oracle Crypto Accelerator 6000 Board, Руководство пользователя

Страница: 81 / 266

Chapter 3 Administering the Sun Crypto Accelerator 6000 Board 59
Password Requirements
Password requirements vary based on the current
set passreq
setting (
low
,
med
, or
high
).
▼
Set the Password Requirements
1. Start the
scamgr
utility.
2. Type
set passreq
.
This command sets the password character requirements for any password
prompted by
scamgr
. There are three settings for password requirements, as
shown in the following table:
▼
Change Password Requirements
1. Start the
scamgr
utility.
2. Type the
set passreq
command followed by
low
,
med
, or
high
.
The following commands set the password requirements for a Sun Crypto
Accelerator 6000 board to
high
:
TABLE 3-6
Password Requirement Settings
Password Setting Requirements
low
Does not require any password restrictions. This is the default while
the board is in non-FIPS mode.
med
Requires six characters minimum. Three characters must be
alphabetic and one character must be nonalphabetic. This is the
default setting while the board is in FIPS 140-2 mode and is the
minimum password requirement allowed in FIPS 140-2 mode.
high
Requires eight characters minimum. Three characters must be
alphabetic, and one character must be nonalphabetic. This is not a
default setting and must be configured manually.
scamgr{mca
N
@
hostname
,
sec-officer
}> set passreq high
scamgr{mca
N
@
hostname
,
sec-officer
}> set passreq
Password security level (low/med/high): high