Sun Oracle Crypto Accelerator 6000 Board, Руководство пользователя

Страница: 59 / 266

Chapter 3 Administering the Sun Crypto Accelerator 6000 Board 37
Interactive Mode
In Interactive mode, you must authenticate as security officer every time you
connect to a board. This is the default operating mode for
scamgr
, and is initiated
by not specifying filename or any parameters when starting
scamgr
. To log out of
scamgr
in Interactive mode, use the
logout
command. Refer to “Authentication
and Logging In and Out With
scamgr
” on page 43 .
Interactive mode presents the user with an interface similar to
ftp
(1), where
commands can be entered one at a time. The
-y
option is not supported in
Interactive mode. Security officers must answer all confirmation questions.
Single-Command Mode
In Single-Command mode, you must authenticate as security officer for every
command. Once the command is executed, you are logged out of
scamgr
.
When entering commands in Single-Command mode, you specify the command to
be run after all the command-line switches are specified. For example, in Single-
Command mode, the following command would show all the users in a given
keystore and return the user to the command shell prompt.
All output from Single-Command mode goes to the standard output stream. This
output can be redirected using standard UNIX shell-based methods.
File Mode
In File mode, you must authenticate as security officer for every file you run. You are
logged out of
scamgr
after the commands in the command file are executed.
To enter commands in File mode, you specify a file from which
scamgr
reads one or
more commands. The file must be ASCII text, consisting of one command per line.
Begin each comment with a hash (#) character. If the File mode option is set,
scamgr
ignores any command-line arguments after the last option. The following example
runs the commands in the
deluser.scr
file and answers all prompts in the
affirmative:
$ scamgr show user
Security Officer Name:
sec-officer
Security Officer Password:
$ scamgr -f deluser.scr -y