Sun Oracle BLADE T6320, Руководство по установке, Страница: 30 / 40

20 Sun Blade T6320 Server Module Installation Guide • April 2010
Where n is an integer representing the slot where the target server module is
installed. The CMM ILOM software displays the current MAC address.
b. Write down the MAC address and use it to configure your DHCP server.
5. View the IP address that DHCP has assigned to the server module SP.
After a valid IP address has been assigned to the server module, view the IP
address, as described in
Step 3 .
▼
To View or Configure the IP Address for the Server
Module SP Using Static IP Addresses — Through the
CMM
1. Attach to the CMM using the CMM serial or Ethernet port.
2. (Optional) View the IP address.
■
To see all the IP address-related information, type:
■
To see only the IP address, type:
3. Navigate to
/CH/BL
n
/SP/network
by typing the following command:
4. Type the following commands:
■
To configure a static Ethernet configuration:
-> show /CH/BL
n
/SP/network macaddress
-> show /CH/BL
n
/SP/network
-> show /CH/BL
n
/SP/network ipaddress
-> cd /CH/BL
n
/SP/network