Sun Oracle BLADE T6320, Руководство по установке, Страница: 20 / 40

10 Sun Blade T6320 Server Module Installation Guide • April 2010
Handling the Server Module
Electronic equipment is susceptible to damage by static electricity. Use a grounded
antistatic wriststrap, footstrap, or equivalent safety equipment to prevent
electrostatic damage (ESD) when you install the Sun Blade T6320 server module.
Caution –
To protect electronic components from electrostatic damage, which can
permanently disable the system or require repair by Sun service technicians, place
components on an antistatic surface, such as an antistatic discharge mat, an antistatic
bag, or a disposable antistatic mat. Wear an antistatic grounding strap connected to
a metal surface on the chassis when you work on system components.
Installing the Module in the Chassis
▼
To Insert the Server Module
1. Ensure that you have the MAC address and serial number from the labels on
the shipping container and server module.
2. Ensure that the modular system (chassis) is powered on.
Refer to “Powering On and Powering Off the Server Module” on page 26 and to
the documentation that came with your Sun Blade modular system.
3. Locate the desired slot in the chassis.
Other filler panels should remain in any unused slots, as they ensure the modular
system complies with FCC limits on electromagnetic interference (EMI).
4. Remove the filler panel from the target slot, if applicable.
5. Optional: Attach a serial cable from the terminal server to the virtual console
connector on the dongle cable.
If you plan to use a dongle cable to connect directly to the server module, you
must connect the terminal server to the dongle cable before you insert the server
module so that you can see the boot messages for the ILOM firmware. Refer to
the sections
“Managing Your Sun Blade T6320 Server Module With ILOM” on
page 4 and “Setting Up the ILOM Software” on page 12 for more information.