Sun Microsystems XVR-500, Руководство по установке

Страница: 15 / 50

Chapter 1 Sun XVR-500 Graphics Accelerator Overview 3
■
Post-texturing specular
■
Stencil operation wrap
Additional Features
■
16 Mbytes of SDRAM display list memory
■
16 Mbytes on-board SDRAM texture memory with full mipmapped trilinear
interpolated texture processing
■
32 Mbytes of frame buffer SDRAM memory
■
10-bit gamma correction
■
Hardware cursor
■
Stereoscopic viewing support (frame sequential)
■
Multisample for antialiased Sun OpenGL for Solaris
■
Display Data Channel (DDC) monitor support for bidirectional communication
■
Display Power Management Signaling (DPMS) to enable monitor’s power-saving
mode
■
High-speed, full-featured DMA over the PCI-64 bus
■
Multiscreen support using multiple boards in a single workstation
■
Two video lookup tables
FIGURE 1-2
shows the Sun XVR-500 graphics accelerator external I/O ports. The
graphics board I/O ports are described in Appendix A, “Sun XVR-500 Graphics
Accelerator Specifications.”
The Sun XVR-500 graphics accelerator features a system for identifying the board by
means of an FRU ID (field replaceable unit identifier). This information is contained
on a PROM chip. “Accessing Field Replaceable Unit Information” on page 35
(Appendix A) describes how to identify the graphics board installed in your system.
FIGURE 1-2
Sun XVR-500 Graphics Accelerator External I/O Port Connectors
Stereo port
Video port