Sun Microsystems SunSAI/P, Руководство пользователя

Страница: 32 / 60

18 SunSAI/P User’s Guide • November 1998
Loading the Driver
When the driver loads, you will see the following (or similar) message:
If there is a problem with the board or the driver configuration, you may see error
messages after this screen—see Appendix A for explanations of the error messages
that may occur.
sitty
options set from a run control (
rc
) script must be set after the download
program has run, and must wait for the board to boot before running.
sitty
options should be added to the end of
/etc/rc2.d
. This can be done by
giving it a name such as “
S99saip
” or “
S99sittystuff
”, where the “
S
” must be a
capital letter, and the greater the number, the later the script is run.
Using
saipconfig
to Configure the
Driver Software
In some circumstances, you may want to configure the SunSAI/P device driver
manually. For example, you may want to use more adapters than are currently
loaded in the system, or you may need to change the default configuration. After
you have installed the driver software, use the
saipconfig
utility to configure the
driver software.
SUNWsaip port:0x00000000 mem=0x00400000 ports=8 SunSAI/P V x.x.x