Sun Microsystems Sun StorEdge T3, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 148

xvi Sun StorEdge T3 Disk Tray Installation, Operation, and Service Manual • July 2000
2.4.2 Cabinet Installation 2-8
2.5 Connecting the Cables 2-17
2.6 Powering On and Verifying the Hardware Configuration 2-24
2.7 Establishing a Network Connection 2-25
2.8 Verifying the Firmware Level and Configuration 2-28
2.9 Installing the Administration Tools 2-33
2.10 Defining and Mounting Volumes 2-33
2.10.1 Single Controller Unit Configuration 2-35
2.10.2 Partner Group Configuration 2-37
2.11 Changing the Default Configuration 2-40
2.12 Connecting the Host System 2-40
2.12.1 Verifying the Data Host Connection 2-41
2.12.2 Establishing Logical Volumes on the Host 2-41
2.12.3 Creating Soft Partitions on the Data Host 2-42
2.12.4 Establishing Alternate Pathing on the Host 2-43
3. Operation 3-1
3.1 Powering Off and On 3-1
3.1.1 Powering Off 3-1
3.1.2 Powering On 3-2
3.2 Reconfiguring the Disk Tray Settings 3-3
3.2.1 Unit Volume Configurations 3-3
3.2.2 RAID Levels 3-4
3.2.3 Cache Modes 3-6
3.2.4 Disabling and Reconstructing the Drive 3-8
3.3 Monitoring the Disk Tray 3-9
3.3.1 Sun StorEdge Component Manager 3-9
3.3.2 SNMP Notification 3-9
3.3.3
syslog
Error Reports 3-10