Sun Microsystems Sun StorageTek T9840D Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 20

background image

Sun Microsystems

Sun StorageTek ™ T9840D Tape Drive Security Policy

The operator can determine whether the power-on self-tests tests have passed or failed by observing the
Operator Panel (See [ETDOG], Table 2-1 “Operator Panel Indicators”). If the Power Indicator is solid
green, then all the power-on self tests have completed successfully. If a power-on self-test fails, then the
Power Indicator LED will continue to flash, and the ETD will report an error and collect dump data, which
includes turning on the Service Indicator LED (either flashing or solid).

10 Physical Security

10.1 Physical Security Mechanisms

The ETD multi-chip standalone cryptographic module includes the following physical security
mechanisms:

•

Production-grade components

•

Production-grade metal enclosure

NOTE: The two security stickers on the ETD do not provide FIPS-approved security.

11 Mitigation of Other Attacks Policy

The module has not been designed to mitigate any specific attacks.

12 References

[1619.1]

IEEE Std 1619.1-2007, IEEE Standard for Authenticated Encryption with Length
Expansion for Storage Devices. May 2008.

[CCM]

NIST Special Publication 800-38C,

Recommendation for Block Modes of Operation: The

CCM Mode for Authentication and Confidentiality

. U.S. DoC/NIST, May 2004. Available at

http://csrc.nist.gov/publications/nistpubs/index.html

[ETDIM]

T9x40 Tape Drive: Interface Reference Manual (April 2008, Rev. N). Available at

http://docs.sun.com/app/docs/doc/95784N

[ETDOG]

StorageTek

TM

T9840 Tape Drive User’s Reference Manual (Sept 2008 rev YA), Available

at

http://docs.sun.com/app/docs/doc/95739revYA1

.

[FC-SB-3]

Fibre Channel Single-Byte Command Code Sets-3 Mapping Protocol (FC-SB-3), Revision
1.6 specification.

[KMS2IM]

KMS 2.0 Installation and Service Manual (Rev. BA), Part Number 316194903BA, Sun
Microsystems. June 2008. Available at

http://docs.sun.com/app/docs/doc/316194903BA

.

[SPC-3]

SCSI Primary Commands-3 (SPC-3)

[SSC-3]

SCSI Stream Commands (SSC-3)

[TLS1.0]

RFC 2246

: “The TLS Protocol Version 1.0”.

Feb 5, 2010

Part 316055201, Rev: AA

Page 19

«
...
17
18
19
20
»

Содержание Sun StorageTek T9840D





















Отзывы:

Нет отзывов

Похожие инструкции для Sun StorageTek T9840D

Бренд: Sans Digital Страницы: 2

USO-HA D500 Series

Бренд: STONEFLY Страницы: 58

My Passport Essential SE

Бренд: Western Digital Страницы: 2

CHROME BOX 2.5 L

Бренд: INOVU Страницы: 30

Бренд: Metro DataVac Страницы: 16

XI2000 Series XI-316R

Бренд: Advanced Industrial Computer Страницы: 2

Бренд: HANBiT Electronics Страницы: 23

Бренд: GARDEN MASTER Страницы: 2

Бренд: eSafe Страницы: 12

Бренд: Enhace Страницы: 6

Бренд: Fantec Страницы: 73

Бренд: HOLZMANN MASCHINEN Страницы: 16

Бренд: Promise Technology Страницы: 78

FUSION FIBRE-FOR-4

Бренд: Sonnet Страницы: 6

Бренд: Sonnet Страницы: 6

Бренд: Rowlinson Страницы: 4

Бренд: Absco Страницы: 18

Бренд: QNAP Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды