Sun Microsystems Sun Storage J4200 Скачать руководство пользователя страница 94

Страница: 94 / 112

Sun Storage J4200/J4400 Array System Overview • June 2009

7. Start the

multipathd

daemon.

For Linux SUSE 9, use the following command:

# multipathd -v0

For other supported Linux versions, use the following command:

# service multipathd start

8. Start the multipathing device mapper target autoconfig.

# multipath -v2

9. List the multipath devices that have been created.

# multipath -ll

The output should list the same number of devices as there are disks in the
J4200/J4400 arrays; it will look similar to the following:

▼

To Disable Multipathing in Linux

1. If a RAID volume, LVM volume, or volume mount have been placed over the

device node of the multipathed disk, quiesce the volume.

2. Use the

multipath -f

command to disable multipathing to a specific device.

multipath -f mpath1

3. Use the

multipath -F

command to disable multipathing on all multipathed

devices.

multipath -F

Note –

If the message

map in use

appears for a device when you attempt to

disable multipathing, the device is still in use. You must unmount or otherwise
quiesce the device before you can disable multipathing. If you cannot quiesce the
device, edit the

/etc/multipath.conf

file to exclude the device and then reboot

the server.

35000c5000357625bdm-2 SEAGATE,ST340008SSUN0.4

[size=373G][features=0][hwhandler=0]

\_ round-robin 0 [prio=2][active]

\_ 0:0:0:0

sda 8:0

[active][ready]

\_ 1:0:0:0

sdm 8:192

[active][ready]

Содержание Sun Storage J4200

















































































































Результаты поиска

Содержание Sun Storage J4200

Отзывы:

Бренды по названию

Популярные бренды

Sun Microsystems Sun Storage J4200, Руководство по обзору системы

Результаты поиска

Содержание Sun Storage J4200

Отзывы:

Бренды по названию

Популярные бренды