Sun Microsystems Sun Storage J4200 Скачать руководство пользователя страница 72

Страница: 72 / 112

Sun Storage J4200/J4400 Array System Overview • June 2009

Enabling and Disabling Multipathing in
the Solaris Operating System

This sections describes how to enable and disable multipathing in the Solaris 10,
update 6, operating system.

Use the

stmsboot

command to enable multipathing in the Solaris 10, update 6,

operating system.

stmsboot

manages enumeration of multipath–capable devices

with multipathing; it has these characteristics:

■

Multipathing-

enabled

devices are enumerated under scsi_vhci(7D).

■

Multipathing-

disabled

devices are enumerated under the physical controller.

This section describes the

stmsboot(1M)

administration program for multipathing.

Device Renaming

In the

/dev

and

/devices

trees, multipathing-enabled devices receive new names

that indicate that they are under multipathing control.

■

This means a device has a different name from its original name (after enabling)
when it is under multipathing control.

■

The

stmsboot

command automatically updates /etc/vfstab and dump

configuration to reflect the device names changes when enabling or disabling
Multipathing.

■

One reboot is required for changes to take effect.

stmsboot

Options

TABLE 5-3

describes the options supported by

stmsboot(1M

TABLE 5-3

stmsboot

Options

-e [

-D fp

| mpt]

Enables multipathing on all supported multipath-capable controller ports.
• Multipath-capable ports include SAS (mpt[7D]) controller ports.
• Prompts you to reboot.
• During reboot, vfstab and the dump configuration update to reflect the

device-name changes.

• Specifying

-D mpt

limits the enabling operation to ports attached using the

specified driver.

Содержание Sun Storage J4200

















































































































Результаты поиска

Содержание Sun Storage J4200

Отзывы:

Бренды по названию

Популярные бренды

Sun Microsystems Sun Storage J4200, Руководство по обзору системы

Результаты поиска

Содержание Sun Storage J4200

Отзывы:

Бренды по названию

Популярные бренды