Sun Microsystems Sun Netra CP3250 Скачать руководство пользователя страница 90

Страница: 90 / 134

5-6

Sun Netra CP3250 Blade Server User’s Guide • April 2009

5.5

Resetting the System Time and System
Date

1. Enter the BIOS Setup utility by pressing the F2

key while the system is

performing the power-on self-test (POST).

2. Press and release the right arrow key until the Exit menu is selected. Press the

Enter key.

3. Select the Load Optimal Defaults option and press the Enter key.

4. Use the arrow keys to return to the BIOS Main Menu.

5. Use the arrow keys to move down the main menu and reset the System Time

and System Date fields.

6. Use the arrow keys to move to the Exit Menu.

7. Choose Save Changes and Exit.

8. Select OK to confirm the changes you made.

5.6

Updating the BIOS

When they are updated, BIOS images will be available as patches at the following
web site:

http://sunsolve.sun.com/

Use the Solaris BIOS Update Utility or the Linux BIOS Update Utility to implement
the updates. For more information, see the

Netra CT 900 Server Product Notes

(819-1180).

Содержание Sun Netra CP3250







































































































































Результаты поиска

Содержание Sun Netra CP3250

Отзывы:

Похожие инструкции для Sun Netra CP3250

Бренды по названию

Популярные бренды

Sun Microsystems Sun Netra CP3250, Руководство пользователя

Результаты поиска

Содержание Sun Netra CP3250

Отзывы:

Похожие инструкции для Sun Netra CP3250

Бренды по названию

Популярные бренды