Sun Fire X4150 Server Product Notes
41
■
“Minimum SIA Version Required For Windows Server 2008” on page 41
■
“SIA Installation Fails If the
Image Is Too Large” on page 42
■
“RHEL 5.2 Installation Fails With
■
“Installing Windows 2003 Using SIA From a NFS Share or FTP Share Does Not
Work” on page 42
■
“Monitor Resolution Might Need to be Reset After Installing Linux Using SIA” on
page 42
■
“Unusable Network Drivers for RHELv5.1 64-bit With Sun Installation Assistant”
on page 43
Full Power Cycle Needed After Expander
Firmware Upgrade (6900072)
The
SIA 2.3 User’s Guide
states:
How to Upgrade Expander Firmware
After selecting the expander(s) to upgrade, click Next.
Follow the on-screen instructions until the upgrade has completed. Upgraded code
will not be used by the system until after a reboot.
Note –
To ensure that the expander firmware upgrade will take effect, after the
upgrade has completed, unplug the power cord and plug it back in.
Minimum SIA Version Required For Windows
Server 2008
In order to install Windows Server 2008 on a Sun Fire X4150 server using SIA, you
will need to use SIA version 2.2.1 or later.
For further information on using SIA to install an operating system onto the server,
see
Sun Installation Assistant for Windows and Linux User’s Guide
available on
.