Sun Microsystems StorEdge A3000, Руководство пользователя

Страница: 46 / 152

2-6 Sun StorEdge A3500/A3500FC Controller Module Guide • August 1999
2.2 Installing the Mounting Rails
■
Tools: #2 Phillips screwdriver
■
Equipment:
■
Mounting rails (2 each)
■
#10 Phillips-head screws
■
#8 Phillips-head screws
1. Determine where you will install the controller module.
Look at the Rackmount Placement Matrix on the
docs.sun.com
Web site if you have
not done so already (Section 2.1.2 “Rackmount Placement” on page 2-4).
2. Unpack the rackmounting hardware.
You should have two mounting rails and at least 12 screws in two sizes (#8 and #10).
3. Identify the left mounting rail from the right one.
The mounting rails are not interchangeable and must be installed in the correct
orientation inside the cabinet. To determine which rail is which:
a. Hold one of the rails by its bracketed end (the end with all the screws) in your
right hand.
b. Aim the right-angled edges so that the long edge (solid) is down, the short edge
(with many holes) is up, and the screws are facing left or right.
■
If the screw heads are on the right, you are holding the right mounting rail.
■
If the screw heads are on the left, you are holding the left mounting rail.
4. Attach the left and right mounting rails.
You will install the rails at the hole positions listed in the Rackmount Placement Matrix
document.