Sun Microsystems StorEdge A3000, Руководство пользователя

Страница: 45 / 152

Chapter 2 Installation 2-5
2.1.3 Installation Worksheet
The Installation Worksheet (
FIGURE 2-2
) contains two sections:
■
Controller Installation—lists the primary steps in the installation process. Use
this section as a reference for each step and checklist for completing each task.
■
Controller and System Information—provides space for recording information
about the controller module and about changes you make to other devices in the
cabinet during the installation.
FIGURE 2-2
Installation Worksheet
❍
Plan Your Configuration
❑
Refer to the Sun StorEdge A3500/A3500FC
Hardware Configuration Guide
❍
Prepare Rails
❑
Unpack rackmounting hardware
❑
Install mounting rails
❍
Prepare Controller Module
❑
Check host SCSI IDs on the
controller module
❑
Check battery manufacture date
❑
Write down date of installation on
battery label
❍
Install Controller Module
❑
Slide controller module onto mounting rails
❑
Install mounting screws
❑
Install SCSI terminators
❑
Connect drive tray SCSI cables to controller module
❑
Connect host SCSI or fibre optic cables to controller
module
❑
Connect power cords to controller module
❍
Complete Installation
❑
Turn on both main circuit breakers
❑
Check for Fault LEDs
❑
Replace panels on cabinet
❑
Install necessary software and configure system
❑
Test SCSI bus and devices
System Information
Cabinet ID (name or number)___________________________
No. of devices installed (tape/drive trays, etc.) ______________
Drive Tray SCSI ID Settings ____________________________
NOTES ___________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
Controller Module Information
Model #________________________________________
Serial # ________________________________________
Date Installed ___________________________________
Installer’s Name _________________________________
Installation Location ______________________________
Controller SCSI ID Settings #1___ #2___
Controller FC-AL Loop ID Settings #1___ #2___
Date on Battery Module ___________________________
Controller and System Information
Controller Installation