Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z, Руководство по установке

Страница: 34 / 68

24 Sun StorageTek 8 Gb FC PCI-Express HBA Installation Guide • September 2009
Removing the Hardware
The following instructions describe the tasks required to remove the HBA. Refer to
your system installation or service manual for detailed HBA removal instructions.
The following steps summarize the hardware removal process:
1. Halt the operating system and remove power from the system.
2. Remove the HBA hardware.
▼
To Remove the HBA
1. Use an ESD strap (refer to “Observing ESD and Handling Precautions” on
page 11 ).
2. Refer to your system documentation to shut down, power off, and unplug the
system.
3. Disconnect all cables.
4. Unscrew the case screws and remove the system case.
5. Remove the mounting bracket of the HBA from the system by unscrewing the
panel screw or removing the clip, whichever is being used.
You can now remove the HBA.