Sun Microsystems APOLLO OC48, Инструкция по установке и эксплуатации

Страница: 44 / 78

24 Sun OC48 Packet Over Sonet Adapter Installation and User’s Guide • December 2001
FIGURE 4-4
Detail of the Copper 16-pin Connectors of the SRP Data Cable
Bring Up the System
Follow the steps in the Administration Guide that came with your system to bring
up the system after installation of an I/O adapter.
You are now ready to install the software packages from the Sun OC48 Packet Over
Sonet 1.0 CD. The following section describes how to verify that the adapter is
correctly installed.
▼
To Verify the Installation
After you have installed the two Sun OC48 Packet Over Sonet adapters, but before
you boot your system, perform the following tasks to verify the installation. Refer to
the Solaris Handbook for Sun Peripherals manual or your Solaris documentation for the
detailed instructions.
1. Follow the steps in the Administration Guide that came with your system to
power on the system.
2. When the banner appears, press the Stop-A key sequence to interrupt the boot
process and display the OpenBoot (
ok
) prompt.