Sun Microsystems 1.0, Руководство пользователя

Страница: 119 / 182

Using the SunFDDI Network Utilities 93
8
RecvP
(Receive Packets)
Running
pf_stat
without an interval and count displays the total number of
packets received since the interface was activated. Running
pf_stat
with an
interval and count displays the number of packets received since the last
interrogation.
Example Local Statistics
The following output was recovered from a single-attached station using the
command shown. A temporary fault condition was simulated by disconnecting
the FDDI cable from the SunFDDI/P card and then reconnecting it.
Note the following observations regarding this example:
•
Accumulated statistics are displayed automatically after every tenth
interrogation.
•
The combination of
Ring=DOWN
and
RMT=ISOLATED
indicate that the
station is disconnected from the network.
Start
pf_stat ---------->
Accumulated statistics
->
Path disconnected
------>
Path re-established
---->
(Ring_OP
received
)
Accumulated statistics
->
Finish
pf_stat --------->
#
<basedir>
/pf_stat pf0 1 20
Ring ECM RMT PCMS Ring_OP XmitP RecvP
UP IN RING_OP ACTIVE 2 26 1d
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
DOWN IN ISOLATED CONNECT 0 1 1
DOWN IN ISOLATED CONNECT 0 0 0
DOWN IN ISOLATED NEXT 0 0 0
UP IN RING_OP ACTIVE 1 0 0
UP IN RING_OP ACTIVE 0 1 1
Ring ECM RMT PCMS Ring_OP XmitP RecvP
UP IN RING_OP ACTIVE 3 29 20
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 1 1
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 0 0
UP IN RING_OP ACTIVE 0 1 1