Sumo SMK35GEN, Инструкция по безопасности и эксплуатации

Страница: 14 / 24

Fig 11
Fig 10
6. OVERLOAD PROTECTION
The generator is fitted with 2 overload protection
devices located on the control panel. In the event that
the load exceeds that stated on the rating plate, the
overload protection will operate and disconnect the
load. If the overload protection device is tripped Check
the electrical load and if necessary reduce the load.The
d.c. overload protection device can be re-set by
pressing in the re-set button (See Fig 10).The a.c.
overload protection device can be re-set by flicking the
breaker switch back over to the On position
(See Fig 11).