SUMO LIGHT SUMOSPACE, Быстрый старт

Страница: 7 / 13

7
August 2018
Extended Functions
Key Function
If the Standby key is pressed for more than 5 seconds you
> 5 sec. can toggle between Factory Default Settings (Signal LED
GREEN) and last User Settings (Signal LED BLUE)
______________________________________________________________________________________________
Flash Erase ; Display shows “FLASH ErASE” ; All the user
DMX ADDRESS parameters will be reverted back to the factory default values
permanently
______________________________________________________________________________________________
Check IP-address and network mode. Displayed will be first
INTENSITY CLOR TEMP the IPs first two Bytes, then the IPs last two Bytes, followed
by the network mode.
- “SLA no con”: Slave mode, not connected to a master /
router
- “SLA Lan con”: Slave mode, connected to a master /router
via ethernet
- “SLA WiF i con”: Slave mode, connected to a master /router
wirelessly
- “net AP”: Master mode, the fixture serves a WLAN Access
Point.
______________________________________________________________________________________________