Summit TX25H, Руководство оператора, Страница: 60 / 93

O
PERATION
2. Remove dust plug from QRC’s.
One double acting (1DA) with detent type and kick off
direction control valve (DCV) is equipped as a standard
fitment in your tractor. The DCV is used when attaching the
implement operated by hydraulic cylinder.
The female Quick Release Couplers (QRC’s) are located at
rear side of tractor.
1. Make sure hose end and coupler receptacles (male &
female) are in perfectly clean condition.
4. Use DCV lever for operating DCV.
5. Move the DCV lever forward or backward to control the
implement.
3. To connect male coupler, push it firmly into female coupler
receptacle. Pull lightly to make sure positive connection
was made.
Quick Release
Couplers
DCV Lever
Hydraulic Coupling Devices
Dust Plug
The tractor is equipped with power steering with a pump of
6.7 CC & steering unit of 40 CC which enables the operator
for ease in steering operation.
NOTE: The power steering function goes off when the
engine is shut-off.
Power Steering
Cylinder
Power Steering
It acts as safety device during transportation of implements. It
is located on front end side of hydraulic rear cover below
driver seat .
Transport Lock (Response Valve)
Use : While implements transportation, lift the implement at
desired height and then fully tighten the response valve to
close it.
Response valve should always be closed during
implements transportation.
Fast
Slow
Response Valve
40-10