(Basic Trouble-Shooting, continued)
2.
DO NOT
DO NOT
DO NOT
DO NOT
modify the equipment without advance
written consent from Summit Equipment, Inc.
Modification includes structural changes, changing
computer logic, moving electric eyes or limit switches,
changing settings, or other modifications to the
equipment or its power unit or controls.
3.
DO NOT
DO NOT
DO NOT
DO NOT
manually override any of the automatic
control sequences of the equipment unless you know
exactly what you are doing. Damage caused by making
a mistake while manually overriding the equipment’s
automatic controls is not covered by the Warranty.
4.
DO NOT
DO NOT
DO NOT
DO NOT
weld on the equipment without removing the
fuses or switching off the circuit breakers on the output
side of the control transformer. Doing so may damage
the controls or other components and would not be
covered by the Warranty.
5.
DO NOT
DO NOT
DO NOT
DO NOT
install the equipment in a way that will allow
voltage spikes or surges to reach its controls (from
lightning, for example). Doing so may result in damage
to the controls or other components and would not be
covered by the Warranty.
7.2
PO Box 1847, Post Falls, ID 83877-1847 • T (208) 773-3885 • F 773-3799 • E <[email protected]>
