2
1. IMPORTANT SAFEGUARDS
1)
WARNING―
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
2)
WARNING―
Do not damage the refrigerant circuit.
3)
WARNING―
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
4)
WARNING―
DANGER: Risk of child entrapment
: Before you throw away your old refrigerator or freezer;
•Take off the doors
•Leave the shelves in place so that children may not easily climb inside.
5) The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
6)
This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance.
Cleaning and user maintenance should not be performed by children without supervision.
7) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
8) Only dispose of this appliance according to local regulations regarding its flammable refrigerant and blowing gas.
Before you scrap the appliance, please take off the doors to prevent children being trapped inside.
9)
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
10) Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service
technician install an outlet near the appliance. Use of an extension cord can negatively affect the performance of the
unit.
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORIZED SERVICE PERSONNEL TO
CARRY OUT SERVICING OR REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.
– SAVE THESE INSTRUCTIONS –
2.
INSTALLATION
2.1
Location
When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated.
Avoid locating your unit near a heat source, e.g., stove, boiler or radiator. Also avoid direct sunlight as it may increase the
electrical consumption. Extremely cold ambient temperatures may also cause the unit not to perform properly. This unit
is not designed for use in a garage or outdoor installation. Do not drape any covering over the unit.
When installing the unit, ensure that 4 inch of free space is left at both sides, 4 inch at the rear and 12 inch at the top of
the unit. This will allow cold air to circulate around the unit and improve the efficiency of the cooling process.
