8
Anti-Tip Bracket Installation
To reduce the risk of tipping the appliance by abnormal usage or improper loading, the
appliance must be secured by properly installing the anti-tip device packed with the appliance.
1. Place the anti-tip bracket on the floor as shown in the figure below. The anti-tip bracket must be
installed at the left side.
2. Mark the locations of the 4 holes of the anti-tip bracket on the floor.
3. Use a 11/50
” masonry drill bit, and insert plastic anchors.
4. Secure the anti-tip bracket to the floor, using screws.
5. Slide appliance into position, and make sure the leg engages the anti-tip bracket.
NOTE:
If the appliance is relocated, the bracket must be removed and installed in the new location
.
