11
OPERATING YOUR APPLIANCE
Install the appliance in a place where the ambient temperature is between 50ºF and 100ºF (10º to
38ºC), and ideally about 77ºF (25ºC). If the ambient temperature is above or below the recommended
temperatures, the interior temperatures may fluctuate, and the expected operating temperature may not
be reached.
Control Panel
NOTE:
Pressing the
ON/OFF
key once can switch off the audible alarm when the alarm is on.
Setting the Temperature Control
• The temperature preset at the factory is 38°F or 3°C.
• The range of set temperatures is from 34°F to 43°F or 1°C to 6°C.
• Set the temperature by pressing the
SETTING
symbol and then pressing the
UP
and
DOWN
symbols. When you press the
SETTING
symbol for the first time, the LED readout will show the last
set temperature.
• The temperature will increase by 1°C/1ºF each time you press the
UP
symbol, and will decrease by
1°C/1 ºF each time you press the
DOWN
symbol.
• Press the
SETTING
symbol to view the set temperature at any time. The set temperature will
flash in the display window for 5 seconds. After 5 seconds, the actual temperature inside the
appliance will reappear in the display window.
Interior Light
• The interior light makes it easy to view your items. Pressing the
LIGHT
symbol toggles between 2
modes of operation for the internal lights: functional (default) mode and showcase
mode.
• When using functional (default) mode, the lights will turn on, and the LCD screen will show
only when a drawer is open.
• When using showcase mode, the LCD screen will show
and the lights will be on whether or
not the drawer is open. To use showcase mode, press and hold the
LIGHT
symbol for 3 seconds
to enter showcase mode. Press and hold for 3 seconds to exit this mode.
