Summit ADFD2D24, Инструкция по эксплуатации

Страница: 13 / 36

13
OPERATING YOUR APPLIANCE
Install the appliance in a place where the ambient temperature is between 50ºF and 100ºF (10º to
38ºC), and ideally about 77ºF (25ºC). If the ambient temperature is above or below the
recommended temperatures, the interior temperatures may fluctuate, and the optimal operating
temperature may not be reached.
Control Panel
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until the temperature display
goes off.
NOTE : Pressing the ON/OFF key once can switch off the audible alarm when the alarm is on.
Setting the Temperature Control
• You can set the temperature by pressing the UP and DOWN symbols. When you press either of
the two buttons for the first time, the LED readout will show the original temperature set previously.
The temperature preset at the factory is 10°F or -12°C.
• The range of set temperatures is from -11°F to 10°F or -24°C to -12°C.
• Set the temperature by pressing the UP and DOWN symbols.
• The temperature will increase by 1°C/1ºF each time you press the UP symbol and will decrease
by 1°C/1 ºF each time you press the
DOWN
symbol.
• Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the UP and DOWN symbol for
3 seconds.
Interior Light
• The interior light makes it easy to view your items. Pressing the LIGHT symbol toggles
between 2 modes of operation for the internal lights: functional (default) mode and showcase
mode.
• When using functional (default) mode, the lights will turn on, and the LCD screen will show
only when a drawer is open.
• When using showcase mode, the LCD screen will and the lights will be on whether or not the
drawer is open. To use showcase mode, press and hold the
LIGHT
symbol for 3 seconds to
enter showcase mode. Press and hold for 3 seconds to exit this mode.
ON/OFF
LIGHT
UP DOWN