Summit ACK54GASW, Руководство пользователя и инструкции по установке

Страница: 18 / 32

Porcelain Oven Interior
With proper care, the porcelain enamel
finish on the inside of the oven will stay new-
looking for years.
Let the range cool before cleaning.
We recommend that you wear rubber
gloves when cleaning the range.
Soap and water will normally do the job.
Heavy spattering or spillovers may require
cleaning with a mild abrasive cleaner.
Soapy, wet metal pads may also be used.
Do not allow food spills with a high sugar or
acid content (such as tomatoes, sauerkraut,
fruit juices or pie filling) to remain on the
surface. They may cause a dull spot even
after cleaning.
Household ammonia may make the
cleaning job easier. Place 1/2 cup in a
shallow glass or pottery container in a cold
oven overnight. The ammonia fumes will
help loosen the burned-on grease and food.
If necessary, you may use an oven cleaner.
Follow package directions.
Cautions about using spray-on oven cleaners:
Do not spray on the electrical controls
and switches because it could cause a
short circuit and result in sparking or fire.
Do not allow a film from the cleaner to
build up on the temperature sensor-it
could cause the oven to heat improperly.
(The sensor is located at the top of the
oven.) Carefully wipe the sensor clean
after each oven cleaning, being careful
not to move the sensor as a change in its
position could affect how the oven
bakes.
Do not spray any oven cleaner on the
outside of the oven door, handles or any
exterior surface of the oven, wood or
painted surfaces. The cleaner can
damage these surfaces.
Painted Surfaces
Painted surfaces include the sides, control
panel and door. Clean these with soap and
water or a vinegar and water solution.
Do not use commercial oven cleaners,
cleansing powders, steel wool or harsh
abrasives on any painted surface.
Shock or Burn Hazard: Before replacing oven light bulb, disconnect the electrical power to the
range at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
WARNING
Oven Light Replacement (on some models)
Be sure to let the light cover and bulb cool
completely.
To remove the cover:
1. Twist lens counterclockwise about a
quarter turn to remove.
Do not remove any screws to remove the
cover.
2. Replace bulb with a 40-watt appliance
bulb or two-prong halogen bulb, as
appropriate.
To replace the cover:
1. Line up tabs of lens in front of tabs on
housing and rotate clockwise to engage.
To remove:
1. Hold a hand under the cover so it doesn’t
fall when released. With fingers of the
same hand, firmly push back the wire
cover holder. Lift off the cover.
CAUTION
Oven Light Replacement (on some models)
Before replacing your oven light bulb,
disconnect the electrical power to the
range at the main fuse or circuit breaker
panel. Be sure to let the light cover and bulb
cool completely.
The oven light bulb is covered with a
removable glass cover that is held in place
with a bail-shaped wire. Remove the oven
door, if desired, to reach cover easily.
Do not remove any screws to remove the
cover.
2. Do not touch hot bulb with a wet cloth.
Replace bulb with a 40-watt household
appliance bulb.
To replace cover:
1. Place it into the groove of the light
receptacle. Pull the wire forward to the
center of the cover until it snaps into
place. When in place, the wire holds the
cover firmly. Be certain the wire is in the
depression in the center of the cover.
2. Connect electrical power to the range.
18