LEFT SEAT
SUPPORT
(PN 82065.400)
7
PG 6
www.summitstands.com
ARMREST
1.
Position the Left Seat Support over the
finished platform assembly as shown in
figure 7.
2.
Secure using two
2 1/2” bolts and lock
nuts
as shown in
figure 8.
Leave these bolts
hand tight for now.
3.
Position the Right Seat Support over the
platform assembly as shown in
figure 9
.
Secure using two
2 1/2” bolts and lock nuts
(see figure 10).
Leave these bolts hand tight
for now.
4.
Line up the Armrest as shown in
figure 11
.
Slide it down over the two Seat Supports and
secure each of the four bolt holes with
1 3/4”
bolts and lock nuts
(figure 12).
5.
Wrench tighten bolts from
Steps 2 and 3.
6.
Insert two rubber bumpers in the holes
on the Seat Supports as shown in
figure 13.
Insert by pushing while twisting slightly.
8
2 1/2” BOLTS, LOCK NUTS -
WRENCH TIGHTEN STEP 5
9
RIGHT SEAT
SUPPORT
(PN 82065.450)
10
2 1/2” BOLTS, LOCK NUTS -
WRENCH TIGHTEN STEP 5
11
ARMREST
(PN 82065.500)
12
1 3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN
RUBBER
BUMPERS
13
