1
2
FINISHED!
Pop 'n Jump
Canopy
Travel Bag
(replacement part # 13410-01)
A
A
B
B
C
Toys
D
C
D
components:
2
assembly:
Press
downw
ard
to fully
expand fr
ame!
Grasp tw
o
opposing corner
s
& pull open!
Press loc
ks
down to loc
k
frame! (2 places)
Remove
contents fr
om
bag!
attach canopy:
x2
x2
3
1
2
IMPORTANT:
Check security of both locks before each use.
!
Hint:
Adjust canopy for maximum
coverage by gently pulling top of
canopy forward so top/sides are
fully extended!
!
IMPORTANT:
Before assembly and each use,
inspect this product for damaged hardware,
loose joints, missing parts, or sharp edges.
DO
NOT
use if any parts are missing or broken.
3
adjust seat height:
to store:
Unsna
p
canop
y!
Twist and f
old
canop
y!
x4
1
st
2
nd
1
!
Initial setting out of package is to the
lowest position. Place child in seat.
Check distance between child’s feet and
floor. Child’s toes should touch floor
(without bouncing). If child is standing flat
footed or toes are not touching floor, adjust
height to any of the three positions (low for
smallest child and high for tallest child).
!
MIDDLE
HIGH
press!
press!
press!
press!
LOW
x4
1
Remove child from seat before adjusting
height! Unlock 2 places, turn product upside
down, and rest on floor for easy adjustment.
!
2
Before adjusting height, release snaps on
corners of fabric floor (snaps only needed in
low position)!
!
3
Adjust to desired height (low, middle,
high) by pressing lock pin fasteners
inward and adjusting frame!
!
4
WARNING
NEVER
adjust seat
while child is in product.
!
IMPORTANT:
Ensure lock pin fasteners
are properly engaged (8 places). All
fasteners must be adjusted to the same
position. Relock frame (2 places).
push loc
k
out then
pull up
to unloc
k
frame!
push loc
k
out then
pull up
to unloc
k
frame!
snap!
snap!
snap!
snap!
snap!
snap!
snap!
