SUMMER WAVES 100Fi, Инструкция по установке и эксплуатации

Страница: 17 / 24

14
FOR INSTALLERS AND PROFESSIONALS
2.3. Trial after installation
Please check all the wirings carefully before turning on the heat pump.
2.3.1
．
Inspection before use

Check installation of the whole heat pump and the pipe connections according to the pipe
connecting drawing;

Check the electric wiring according to the electrical wiring diagram and earthing connection;

Make sure that the main power is well connected;

Check if there is any obstacle in front of the air inlet and outlet of the heat pump
2.3.2
．
Trial

The user is advised to start the water pump before the heat pump, and turn off the heat pump
before the water pump for long life circle.

The user should start the water pump, and check for any leakage of water; Power on and press
the ON/OFF button of the heat pump, and set desired temperature in the thermostat.

In order to protect the heat pump, the heat pump is equipped with start delay function. When
starting the heat pump, the fan will start to run in 3 minutes, in another 30 seconds, the
compressor will start to run.

After pool heat pump starts up, check for any abnormal noise from the heat pump.

Check the temperature setting.
2.4. Maintenance and winterizing
2.4.1 Maintenance
The maintenance should be carried out once per year by qualified professional technician.

Cut off power supply of the
heat pump before cleaning,
examination and repairing .
Do not touch the electronic
components until the LED
indication lights on PCB turn off.

Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
thinners or any similar fuel.

Check bolts, cables and connections regularly.